£12.97£15.57exc VATinc VAT
Available to order
Product code: CR01058
Available to order
Spraypaint Car-Rep Gold Effect 400ml Styling Paints- Product number: CR01058 Leaves shiny decorative surface, dries fast, and covers well. For metal, wood, glass and most artificial surfaces. Limited wear and weather resistance. We recommend 2k Lacquer 500ml over the top for better resistance. Coverage around 1-2 m². Drying time (at 20°C, 50% relative air humidity): Dust-dry: after approx. 30 minutes, Dry to touch: after approx. 2 hours, Completely dry: after 48 hours Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Spray several thin layers from a distance of 15 cm. Two paint layers are needed for adequate film thickness. Let the surface dry about 5 min. between each layer. Clean the nozzle by spraying the can upside down until only propellant comes out. Wipe off any excess paint from nozzle if necessary. Do not polish the finished painted surface or the effect will be flattened Also available in Copper and Chrome Finishes
Product code: CR01058
Available to order
Spraypaint Car-Rep Gold Effect 400ml Styling Paints- Product number: CR01058 Leaves shiny decorative surface, dries fast, and covers well. For metal, wood, glass and most artificial surfaces. Limited wear and weather resistance. We recommend 2k Lacquer 500ml over the top for better resistance. Coverage around 1-2 m². Drying time (at 20°C, 50% relative air humidity): Dust-dry: after approx. 30 minutes, Dry to touch: after approx. 2 hours, Completely dry: after 48 hours Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Spray several thin layers from a distance of 15 cm. Two paint layers are needed for adequate film thickness. Let the surface dry about 5 min. between each layer. Clean the nozzle by spraying the can upside down until only propellant comes out. Wipe off any excess paint from nozzle if necessary. Do not polish the finished painted surface or the effect will be flattened Also available in Copper and Chrome Finishes
Available to order
Available to order
Available to order
Available to order
Available to order
Available to order
Available to order
Available to order